How to repair cracks in your driveway? – A Definitive Guide

There are many reasons that your driveway won’t last for long, in contrast to what your contractor has said about the lifetime of it. Cracks appear in the driveway but that’s not a matter to be worried about. Let’s talk about repairing cracked driveway.

Repairing Cracks – An In-Depth Analysis

Discoloring or a cracking driveway is a problem that many homeowners face. Repairing cracks in concrete driveways is a job that can be done by DIYers as well as professionals. It depends on your choice whether you go for a professional or do it yourself. How to repair cracks in your driveway? – A definitive guide ? It is a question of importance and you need to know about it. There are a number of reasons which cause the shortening of the life of your driveway. These include material of low quality, inadequate concrete mix, and bad weather conditions, etc.

In the beginning, you will see that there are small cracks that can not be recognized that easily, rather need an inspection from a relative closer position. If you notice them at an early stage, then these can be fixed very easily. Usually, they begin with the wideness of 3mm or less and this is the stage where you should be looking for answers to questions like ‘how to repair cracks in concrete driveway?’

Though it can be repaired later as well, the fittest time for repairs is when the cracks are smaller in size. This timely repair prevents any further harm to your driveway, not letting them transform into big cracks.

If the size of the cracks grows bigger than 1cm then they need to be cared for properly by cutting and later making repairs. Repair cracks of the concrete driveway in a manner that they don’t crack again and cause additional costs or energies. That’s the reason they need care and should be done with proper considerations.

Sometimes that owner makes a grave mistake by ripping out completely the driveway. This is not the solution to the problem, instead, we should look at the economic solutions. You can start it over if you have got enough money, but again, it is not the proper solution. Repair is the best solution if there is no serious problem with the concrete.

If you feel that the quality of the driveway is not sound, then the solution to it is ripping out the whole or part of it and replacing it. But you should not make any decisions without consulting a professional. A professional is well-versed in checking the viability of concrete structures and will let you know if to replace it partially or wholly. A professional will also guide you on how to repair cracks in a concrete driveway if you want to do it yourself.

How to fix large cracks in concrete driveway? The answer is the same, consult a professional and they will let you know whether the process would be different from the procedure for smaller cracks. But the two vary just in making cuts for larger cracks. To repair cracks concrete driveway, you should be careful of minor details and do the job with intricacy to ensure that the cracks don’t reappear.

Steps in Repairing a Driveway

To know well how to repair cracks in concrete driveway is the best thing to be aware of. It not only saves you from further worries but also makes it new as well as strong. Do the project right and enjoy a fine driveway for years. Get yourself educated about how to repair concrete cracks in the driveway and then go for the practice procedure. Here we have brought a complete guide for you.

  • Clean the Driveway

One of the most important things in how to repair cracks in concrete driveway is to clean the driveway. Clean dust, leaves, acorns, etc. from the driveway with a broom or leaf blower. If there are any stains, then they must be removed to ensure that the cracks are filled without any errors. If there are any weed growths, root out them before you go for filling the cracks.

One thing you must remember is that you should not seal the patch until four to six weeks have passed after the application of the filler.

  • Clean the Driveway and Mix the Sealant

Apply the sealant on a sunny day. If it is cloudy, then it is good to postpone it to some other day. Before application of the sealant, clean the driveway and with a broom or a blower. Then mix the sealer and the bucket should be turned upside down twice or more to ensure that it is mixed properly.

  • Seal Edge by Hand

Apply the sealant with proper care. Begin sealing the filled area by ending towards an open area, not doing it unwisely to end up in some closed place. The edges should be cut down with the use of an old paintbrush. Do the rest of the area with a squeegee while the edges should be done with a paintbrush to ensure that they look fine.

  • Pour Sealant along the Edge

Once you are done with the main area, you move towards the edges. Then you should spread the asphalt on the edges to ensure strength. The buckets coming with sealant are heavy, be careful while handling and them and ensure that they are not spilled. Once you have applied sealant, smooth it with the help of a squeegee. Ensure that if any crack is left, it is filled. Go back and forth on the given area and confirm that there is no small space left. The finished area should be left for 24 hours and then it can be used. 

  • Apply a Second Coat

Sometimes you feel that a second coat can serve you better. So, check if it needs another one.